I've got a Python 4105 remote start with a Evo All. The wiring connection diagram has Starter1 out and Starter2 out, both positive, going into the python. Problem is there is only one wire for Starter out in the python. How do I do the second starter wire? I've seen some on the 'net say you need to wire it with the fist with a relay, but it has not been on Subarus. If that is the case, what type of relay and how do I wire it with the starter wires?
Also, the python had two fused wires for 12 volt input, but there is only one wire on the car's ignition harness for 12v. Do I wire all three together, or just not use one of the inputs on the python?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
